Virtual Attendance Available with the MicroTek Virtual Classroom! (click to learn more) or Contact Becht Technical Training!
Course Venue - MicroTek Los Angeles - El Segundo, California
Course Fee - US$1,950 US$1,755
Becht Engineering is excited to be partnering with Codeware, Inc. to present this 2.5-day COMPRESS software training. Students will be building models of pressure vessels and performing calculations using COMPRESS. Upon completion of this course participants will be able to design and rate vessels with ease. Our instructor, Don Kurle, PE, has been working with Section VIII, Division 1 for over 35 years and worked several years for Codeware, Inc. as a technical support engineer assisting clients with technical issues related to application of the COMPRESS program. He also developed and presented training classes in the use of the program.
Who Should Attend? Individuals involved with the design or inspection of pressure vessels who are looking to gain hands-on experience using COMPRESS. This course is intended for beginners, as well as experienced vessel designers and inspectors. To benefit most from this course, a familiarity with the ASME Code is recommended, but attendees are not required to have an Engineering degree or previous work experience in the subject matter. If you wish to increase your knowledge of the Code in addition to learning how to use COMPRESS, we recommend registering for our ASME Section VIII, Division 1 Design with COMPRESS training course.
Key Topics Covered Include:
Upon completion of this course, you will receive a certificate for attending 20 hours of classroom instruction.
Click to Register and Pay On-line for this or other Becht Courses
Questions? Contact Becht Technical Training: 908-580-1119; Email Training Click Here
This training is presented in partnership with
Becht Engineering is excited to partner with Codeware, Inc. to present COMPRESS Software Training! We are now offering THREE types of courses, a 2.5-day Introduction to COMPRESS course, a 5-day course combining ASME Section VIII, Division 1 Design with COMPRESS training and a NEW 4-day Heat Exchanger Design with COMPRESS course! Through instruction in a computer lab setting, students will gain hands-on experience using COMPRESS and working through the program and example problems along with the instructor.
Arrangements can also be made to have COMPRESS training courses taught privately at or near your site.
To learn more or schedule a private course
Contact Becht Technical Training
Becht Nuclear Lunch & Learn
Becht Nuclear Services offers free, 1-hour overview sessions on a variety of topics such as:
Each seminar is followed by a question period for participants.
Instructor: George Antaki, PE, fellow ASME, is chairman of ASME III Working Group Piping Design, chairman of ASME B31 Mechanical design Committee, and member of ASME O&M Subgroup Piping. George is the Division Manager for Becht Nuclear and has over 40 years of hands-on experience.
Click for Info
Becht Training Courses BACK TO TOP ↑