Log in

Login to your account

Username *
Password *
Remember Me

Becht/HEA Engineering

Division Manager, Becht Engineering Canada, Ltd.

seipp2012

Mr. Seipp has over 15 years of experience in design and analysis of process and power equipment, vessels, piping, and structures. He has extensive analytical experience including linear and non-linear finite element analysis using ANSYS and ABAQUS, buckling analyses, steady-state and transient heat transfer and thermal stress analysis of pressure vessels

and piping, fitness-for-service evaluations, and fatigue assessments. Mr. Seipp has worked for clients all around the world, who are in many different industries such as oil sands, refining, chemicals, mining, metals processing, pressure vessel and piping fabrication, and aerospace.

Prior to joining Becht, Mr. Seipp worked for 10 years at Fluor where he was the finite element analysis expert for Fluor’s Calgary office, providing finite element analyses and computational fluid dynamics for clients, worldwide. Prior to that, Mr. Seipp worked at Syncrude, Wascana Energy, and Imperial Oil.

Mr. Seipp received a M.Sc. from the University of Minnesota in Aerospace Engineering, and a B.Sc. in Mechanical Engineering from the University of Saskatchewan. He is a licensed professional engineer in the Provinces of Alberta, Saskatchewan, and Ontario. Mr. Seipp is active in ASME Codes and Standards as a member of Working Group on Design-By-Analysis of Section VIII. Mr. Seipp is also a prolific author, writing 19 peer-reviewed papers and presentations to several international conferences, 3 journal articles, and delivering two tutorials at ASME Conferences on “Buckling and Instability Phenomena” and “The New Design-By-Analysis Rules in ASME Section VIII, Division 2”.

Trevor is also the current vice chair of the Design and Analysis Technical Committee of the ASME Pressure Vessels Piping Division. He has also developed a week-long course on Design-By-Analysis using ASME Section VIII, Division 2.

  • All
  • Advisor Resources
  • CorrosionMaterials
  • DimensionalTechnologies
  • Due Diligence
  • Heavy Lift
  • Inst/Elec Controls
  • Leadership
  • Machinery
  • Mechanical Eng
  • Mechanical Integrity
  • Nuclear
  • Piping
  • Process Eng
  • Reliability
  • Training
  • Turnarounds
  • President, Becht Engineering

    ChuckBecht IV

    Dr. Becht, Fellow ASME, former Chairman of the ASME B31.3, Process Piping Code and 2014 J Hall Taylor Medal recipient, is a recognized authority in pressure vessels, piping, expansion joints, and elevated temperature design. He has more than 40 years of experience in design, design review, analysis, check-out, mechanical integrity, development, troubleshooting, and failure analysis.

    Read More
    • Leadership
    • Piping
  • Vice President - Business Development

    basil 2018John Basil has over 30 years of experience in consulting engineering, design and construction management in a wide variety of heavy industries. As part of his management and leadership roles in engineering companies and the US Navy, he has organized technical and operations teams; developed project concepts and proposals; managed a wide variety of projects, client programs, alliances and Joint Ventures; and strengthened companies...

    Read More
    • Leadership
    • Training
  • Vice President - Engineering

    Chuck Becht VMr. Becht is a mechanical and nuclear engineer with expertise in FEA and thermo-hydraulics modeling and analysis. His experience ranges from developing new designs meeting code requirements, failure investigation and repair, and FFS assessments.

    In the hydraulic area, his work includes the study of NRC issues related to entrapped gases in liquid lines, for which he developed hydraulics models and analysis

    Read More
    • CorrosionMaterials
    • Leadership
    • Machinery
    • Mechanical Eng
    • Piping
    • Reliability
  • Vice President - Maintenance & Projects

    Derek Becht

    Derek Becht is a chemical engineer with expertise in design, operation, and optimization of process equipment.  He has supported every refinery process unit in either a process or operations support & management function.  Derek has extensive experience supporting capital projects including two replacement FCC Reactors, new Crude Unit and FCC Main Fractionator pump-around heat exchangers, Crude Column Preflash internals, a Turbine Fuel Merox expansion, and

    Read More
    • Advisor Resources
    • Heavy Lift
    • Leadership
    • Mechanical Integrity
    • Process Eng
    • Turnarounds
  • Vice President - Administration

    matt wizemanMatthew Wizeman is a Certified Public Accountant with over 25 years of experience in accounting and finance. He received his Masters in Business Administration from the University of Florida and his BBA in accounting from Niagara University, where he graduated with honors. Matthew began his career in public accounting and then transitioned into the professional services industry where he worked for a few firms and served as a Controller for a boutique law firm in New York. Mr. Wizeman spent a few years as an entrepreneur where he owned his own company. Prior to joining Becht, he served as the CFO for a rapidly growing logistics firm for 14 years.

    Read More
    • Leadership
  • Director, Mechanical Integrity

    hoffman2012Rick Hoffman joined Becht Engineering in June, 2009 as a Senior Engineering Advisor. He has more than 39 years experience in engineering, reliability management and maintenance in the refining, petrochemical and synthetic fuels industries. Before joining Becht Engineering he was the Director, Specialty Engineering for LyondellBasell Industries. In this role he had worldwide responsibility for corporate technical support, mechanical engineering and maintenance for more than 40 chemical plants and two refineries. He was also responsible for capital project support, setting the strategic direction for Lyondell maintenance and reliability programs and all engineering and maintenance standards. 

    Read More
    • Due Diligence
    • Mechanical Integrity
  • Manager, Refinery & Petrochemical Plant Services

    Becht Bobby Wright

    Mr. Wright has 38 years experience in downstream plant engineering, reliability, maintenance, inspection and mechanical integrity. He comes to Becht from Stress Engineering Services (SES) where he served as Principal in the Plant Services Practice since 2013 (Engineering Manager) and on the Board of Directors. He was responsible for the Downstream Plant Engineering Practice that included 5 offices.

    Read More
    • Machinery
    • Mechanical Integrity
    • Process Eng
  • Division Manager - Mechanical Engineering

    Nonlinear Stress Analysis, Elevated Temperature Mechanical Material Behavior

    dewees daveDave has worked in the petrochemical, nuclear and power industries over the last 16 years. Dave’s specialties include finite element analysis (FEA - heat transfer/thermal-stress, creep, fracture and shock and vibration), fatigue, fracture and creep modeling, as well as computational fluid dynamics (CFD) and multiphysics problems. 

    Read More
    • Mechanical Eng
  • Manager, Reliability Technologies

    king2012Mr. King has over 10 years of mechanical engineering experience in the Oil & Gas Industry. Mr. King’s areas of expertise include FCCU maintenance and turnarounds, pressure vessel design, and risk based reliability work. He has built turnaround work scopes and packages utilizing risk based work selection and developed equipment strategies for existing and grass roots units.  His turnaround engineering support includes unit coverage of FCC, HF Alkylation, Crude, Coker, Hydrotreating, Sulfur and Utilities

    Read More
    • Reliability
  • Engineering Manager

    Eileen ChantDr. Eileen Chant has 25 years of experience in the areas of engineering project management, modeling and performance evaluation of mechanical and energy systems. She has managed a number of projects developing and applying risk-based inspection methodologies and software tools for use by the process and power industry in developing cost-effective inspection and maintenance programs in accordance with API RP-580 and the ASME Inspection Planning Document, PCC-3. She has also managed projects developing and applying fitness-for-service software tools in accordance with API 579/FFS-1 and new methodologies for collection, management and statistical analysis of NDE data.

    Read More
    • Mechanical Eng
  • Director, Advisor Resources

    Winkler

    Becht Engineering has more than 800 specialists on our worldwide roster, most with over 25 years experience in their specific areas of expertise. Becht Engineering's resources also include experienced and seasoned professionals (many with more than 30 years of experience in pace-setting owner organizations) who successfully manage, plan, review, and supervise process plant projects and turnarounds on behalf of the owner.

    Read More
    • Advisor Resources
  • Chief Engineer, Nuclear Services Division

    antaki2012

    Mr. Antaki, Fellow ASME, has over 40 years of experience in nuclear power plants and process facilities, in the areas of design, safety analysis, startup, operation support, inspection, fitness for services and integrity analysis, retrofits and repairs. George has held engineering and management positions at Westinghouse and Washington Group International, where he has performed work at power and process plants, and consulted for the Department of Energy (DOE), the Nuclear Regulatory Commission (NRC) and the Electric Power Research Institute (EPRI). He also is an

    Read More
    • Nuclear
  • Division Manager, Becht Engineering Canada, Ltd.

    seipp2012

    Mr. Seipp has over 15 years of experience in design and analysis of process and power equipment, vessels, piping, and structures. He has extensive analytical experience including linear and non-linear finite element analysis using ANSYS and ABAQUS, buckling analyses, steady-state and transient heat transfer and thermal stress analysis of pressure vessels

    Read More
    • Mechanical Eng
  • Division (Pono) Manager, Metallurgical and Corrosion

    Buchheim

    Mr. Buchheim is a recognized industry expert in damage mechanisms, sulfidation, wet H2S cracking, creep, HTHA, fire assessment, IOW’s, corrosion reviews, RBI, and FFS assessments. With his over 33years of experience, he has been involved in all aspects of materials engineering including corrosion prevention, failure analysis, fire damage assessment and fitness-for-service assessments in the entire range of fixed equipment primarily in refineries, but also petrochemical units and upstream facilities.

    Read More
    • CorrosionMaterials
  • Division Manager - High Energy Power Plant Piping Engineering

    fronek frankFrank Fronek has worked in the fossil power industry for 48 years engineering, designing, analyzing and supporting HE Piping systems in new coal, gas, oil, biomass, solar and other type power plants, as well as condition assessment and troubleshooting of operating facilities. In 1983, Frank founded a piping engineering company in NJ and a fabrication shop in Texas to produce a complete line of pipe support components and related structures. These facilities were acquired by The Shaw Group in 1994. After working for The Shaw Group, Frank founded Fronek Power Services (FPS), a piping engineering company, acquired by Becht Engineering in January 2018. Frank will work in...

    Read More
    • Mechanical Eng
    • Piping
  • Manager, Power Generation Plant Services

    zoll greg

    Greg Zoll's role will include leading Becht’s Technical Subject Matter Experts developing power generation and plant solutions for Becht clients.  Greg brings over 30 years of experience in power generation including cogeneration and simple cycle plant technical assessments, development of power generation feasibility studies, assistance and coordination of plant permitting and response to power plant environmental issues. 

    Read More
    • Mechanical Eng
  • Heavy Lift Manager

    joe collins

    Joseph (Joe) Collins is the Heavy Lift Division Manager for Becht Engineering Co., Inc. He is providing Consulting and Design Services for Lifting and Transport of process equipment, machinery, chemical, refining and nuclear vessels and components.His duties include consulting to clients using the world’s largest cranes and super heavy lift projects.

    Mr. Collins has over 45 years of experience in the heavy lift industry. He has served as Commissioner and later as Vice President for the National Commission for the Certification of Crane Operators (NCCCO). Joe also served as a member of the Cranes and Derrick Advisory Committee (C-DAC) to OSHA, which wrote and delivered the initial draft of the new OSHA Crane Safety Standard. In January 2011, Engineering News Record magazine honored Joe as one of the “Top 25 Newsmakers” for his work with C-DAC.

    Read More
    • Heavy Lift
  • Manager Richland Office

    George Abatt

    Dr. Abatt, Fellow ASCE, has over 30 years experience in engineering practice, education, and management of multi-disciplinary engineering teams.  He has authored numerous technical reports and presentations in his professional career that highlight his technical expertise with linear and nonlinear structural analysis, seismic analysis, soil-structure interaction, fluid-structure interaction, and impact analyses.  Dr. Abatt has acted as a Subject Matter Expert for both the US Department of Energy and the US Nuclear Regulatory Commission.  He is the Vice-Chair of the ASCE Dynamic Analysis of Nuclear Structures Committee and is the Manager of the Richland, Washington Office of Becht Engineering.

    Read More
    • Nuclear
  • Senior Engineering Fellow and ASME Past President

    Bob Sims2017Mr. Sims is a recognized authority in risk-based technologies for optimizing inspection and maintenance decisions; design and analysis of high pressure equipment, including high pressure, high temperature (HPHT) equipment for oil and gas exploration and production and he has extensive experience in mechanical integrity evaluations of existing equipment and Fitness-For-Service analyses. Mr. Sims has served as President of the ASME and member of the 

    Read More
    • Mechanical Eng
  • Frikken2012

    Mr. Frikken is an internationally recognized authority in piping systems, valves, and the development of standards and specifications. His work with Becht includes designing new piping systems, analyzing existing piping systems, assisting manufacturers with respect to code compliance issues, and providing instruction on process piping and piping flexibility analysis courses. Don has received a number of awards including the ASME B31 Forever Medal for Excellence in Piping, and the ASME Melvin R. Green

    Read More
    • Mechanical Eng
    • Piping
  • Process Engineering and Process Safety Manager

    eric ye bechtEric Ye is the Process Engineering and Process Safety Manager for Becht Engineering.  Mr. Ye is responsible for ensuring that client’s needs are meet with the highest level of quality and that projects are properly coordinated, resourced, and delivered in a timely manner.  Mr. Ye is also responsible for developing offerings and business development for the Process Engineering and Process Division by cultivating existing or developing new relationships and identifying/developing new opportunities and offerings.

    Read More
    • Process Eng
  • Division Manager - Instrumentation, Electrical, Automation, and Controls

    Parakin Roger Roger Parakin joined Becht Engineering in 2019 as the IEAC Division Manager. He has more than 35 years industry/facility experience in instrumentation, electrical system design, project management, construction management, DCS/PLC configuration and systems administration.  This experience has included plant operations and capital projects in both the petrochemical and oil sands industries.

    Read More
    • Inst/Elec Controls
  • Division Manager - Dimensional Technologies

    swymn mikeInvolved with laser scanning since 1998, Mike cofounded Becht's Laser Scanning Division in 2009. He began his career designing piping systems and working with 3-D models as an end-user of laser scan data.

    Mike’s extensive knowledge in all aspects of laser scanning has served him well. He has worked with all of the popular digital design software available.

    Earlier in his career, Mike started the HiCAD Laser Scanning Division in 1999. In five years it grew to the largest service provider in the U.S. (prior to being sold). In addition to laser scanning, he has worked with all of the major 3-D design platforms - such as AutoCAD, PDS, PDMS-2, Smartplant and Autoplant Bentley.

    Read More
    • DimensionalTechnologies
  • Manager - Dimensional Technology Services

    matt craig - becht Matthew Craig has been working in, and servicing the Engineering, Procurement and Construction (EPC) business segment within the oil and gas and chemical industries for the past 38 years. For the past 20 years, he has specialized in dimensional control hardware and software technologies that focused on 3D data capture. His experience includes product planning, product management, project management, software business development, software channel management, systems analyst, application programmer, and structural designer.

    Read More
    • DimensionalTechnologies
load more hold SHIFT key to load all load all