EPRI has just published the report “Roadmap to Integrity Evaluation and Repair of Nuclear Plant Piping” EPRI report number 3002013156, dated December 2018, prepared by Becht Nuclear Services, under EPRI Project Manager T. Eckert.
The methods and criteria for the evaluation of degraded and non-conforming conditions in piping systems in nuclear power plants are dispersed among a number of ASME XI Code sections, Appendices, Code Cases, and US NRC regulatory requirements, generic letters, and inspection manual sections. This multitude of requirements makes it necessary to have this roadmap to help the engineer make the right fitness-for-service evaluation and the right repair decision.
The EPRI road map addresses the fitness-for-service evaluation methods and criteria for the two most common damage mechanisms in nuclear power plant piping systems: Wall thinning, and cracking. The roadmap also addresses non-conformance caused by overloads, i.e. operating loads that exceed the design loads.
Regarding repairs of nuclear plant piping systems, the roadmap addresses twenty one repair options, their ASME XI requirements, and the US NRC regulatory constraints applicable in each case.
If you have any questions you may comment on this blog below. If you wish to contact George Antaki, CLICK HERE.
George Antaki, Fellow ASME, has over 40 years of experience in nuclear power plants and process facilities, in the areas of design, safety analysis, startup, operation support, inspection, fitness for services and integrity analysis, retrofits and repairs. George has held engineering and management positions at Westinghouse and Washington Group International, where he has performed work at power and process plants, and consulted for the Department of Energy (DOE), the Nuclear Regulatory Commission (NRC) and the Electric Power Research Institute (EPRI).
Click to View Becht’s 2018 Technical Training Public Course Calendar