Gersh Kogan

The Becht Team

Gersh Kogan

High Temperature Piping SME

Gersh Kogan has 40 years’ experience in the power and petrochemical industry in the principal areas of piping, supports, and mechanical engineering for various types of power plants including fossil, combined cycle and other types of plants. Has participated in the design of critical piping systems for new plants, troubleshot during start-up and operation, assisted in balancing piping loading at steam turbines, pumps, other rotating equipment, and designed modifications to existing plants.

Assisted in setting up inspection program and performing plant piping inspection in compliance with B31.1 Chapter VII.

Assisted in setting up ISO 9000 QA program.

Joint Becht Engineering in 2017. Since 2019 as Becht Piping Group Lead was responsible for projects on timely execution, assuring high quality, professional and economical solutions and engineering of the projects. Responsible for developing customer interface and preparing proposals. Was instrumental in setting group standards and procedures.

Prior to joining Becht for 12 years was Manager of Engineering with Fronek Power Systems responsible for the design, execution, and standardization of the project.

From 1985 to 2004 was Manager of Piping and Support Engineering Group for Shaw Group and assisted in setting manufacturing support and procedures in piping and pipe support fabrication. Assisted during installation and construction, troubleshooting piping and equipment problems for construction and maintenance groups. Responsible for mentoring of young engineers.

Inspected and evaluated various abnormal piping conditions in operating combined cycle plants including “banana” headers, excessive noise, water hammers, and pipe cracking, and high equipment loads. Assisted in repair and installation procedures, including the design of temporary restraints/supports and modification of existing piping and supports.

Mr. Kogan holds a Bachelor of Science in Mechanical Engineering degree and a Bachelor of Science in Agricultural Machinery.

  • All
  • Advisor Resources
  • Becht Canada
  • Business Administration
  • Business Development
  • Business Strategy
  • Capital Projects
  • Corrosion Materials
  • Due Diligence
  • Fired Heaters
  • Heavy Lift
  • Inst/Elec Controls
  • Leadership
  • Machinery
  • Maintenance & Turnarounds
  • Mechanical Eng
  • Mechanical Integrity
  • Nuclear
  • Piping
  • Process Eng
  • Reliability
  • Training

Charles (Chuck) Becht IV, PhD, PE

Chief Executive Officer
Read More

Charles (Chuck) Becht V, PE

President
Read More

Abby O. King

Vice President of Plant Services
Read More

Katherine ‘Katie’ Taylor

Vice President of Engineering
Read More

Andy Saunders-Tack

Managing Director Asia-Pac
Read More

Mariano Bertaina

Managing Director Latin America
Read More

Chris van der Beek

Managing Director EMEA
Read More

Matthew Wizeman, CPA

Vice President – Administration
Read More

Jered Watt

Director of Business Development – North America
Read More

Dave Dewees, PE

Division Manager - Mechanical Engineering
Read More

Matthew Caserta, PE

Division Manager and Mechanical Integrity Expert
Read More

Jeremy Staats, PE

Division Manager – Corrosion, Materials, & Integrity
Read More

Bobby Wright, PE

Director - Mechanical Integrity
Read More

Doug Knapke

Division Manager – Process Engineering
Read More

Fred Lea, Jr., PE

Division Manager - Machinery/Rotating Equipment
Read More

Greg Zoll, PE

Electrical, Instrumentation and Controls Division
Read More

Jeannie Lewis

Division Manager – Engineering Standards
Read More

Kristen Becht

Manager - BechtCONNECT & Technical Training
Read More

Robert Ohmes

Division Manager – Strategic Business Planning
Read More

Clayton Smith

Division Manager - Turnaround, Maintenance & Reliability Services
Read More

Dan Giuliani PMP

Division Manager – Capital Projects
Read More

Gordon Swett

Division Manager - Performance Group
Read More

Grant Jacobson

Division Manager - Fired Heater Services
Read More

Joe Collins

Division Manager -Heavy Lift
Read More

Mark Fronek

Digital Wizard
Read More

Marga Briggs

Division Manager - Advisor Resources
Read More

Rafael Rengifo

Director - Midstream
Read More

Rick Hoffman, PE, CMRP

Manager - Litigation and Due Diligence Services
Read More

George Antaki, PE

Chief Nuclear Engineer
Read More

John Conway

Turnaround Inspection Planning Lead
Read More

Frank Fronek

High Energy Piping SME
Read More

Tim Shepperd

Director - HF Alkylation
Read More

Gerrit Buchheim, PE

Corrosion/Materials SME
Read More

Trevor Seipp, PEng

Design by Analysis SME
Read More

Bonnie Winkler

Advisor Resources
Read More

Eric Ye

Process Group Lead
Read More

John Hackett

Manager - Human Resources
Read More

Libby West

Business Manager
Read More

Melvin G. Larson

Manager – Strategic Consulting
Read More

Jean-Gaël Le Floc’h

Manager - EMEA Operations
Read More

Kathy Lipski

Marketing Manager
Read More

Ida Soto, M.S.

Project Manager - Performance Group
Read More

Darren York

Manager – Value Chain Optimization
Read More

Mike Annon, PMP

Read More

David C. Anthony III, PE

Read More

Dana Baham

Refining and Petrochemical Engineer and Chief Inspector
Read More

Blagoje Baljozovic

Read More

Richard Basile

FCC Mechanical and ASME Code
Read More

Trevor Berry

Sr. Pressure Vessel Engineer
Read More

Gordon Lawrence

Global Group Lead - Turnaround Services – Reliability, Maintenance & Turnarounds Division Regional Manager – EMEA & APAC: Project Assurance
Read More

Steve Bolinger

Refining and Petrochemical Mechanical Integrity Expert
Read More

Benjamin Brandt

NDE and Inspection Specialist
Read More

Allen Hamilton PMP CCE

Subject Matter Expert - Cost Management
Read More

Timothy Scholand

Assistant Division Manager - Fired Heater Services
Read More

David J Keen

Ammonia and Downstream Plant Reliability SME
Read More

Victoria Araiza

Coordinator - Cost Tracking
Read More

Keith Austin

Furnace Operation
Read More

Francie Bridgewater

CCD Project Manager and Analyst
Read More

Haley Bechtle

Billing Manager
Read More

Meredith Bell

Nominations Coordinator
Read More

Michael (Mike) Bober

Senior Trainer
Read More

Robert ‘Bob’ Brown, PE

Fatigue, Fracture and FFS
Read More

Mary Buchheim

Chemical Engineering & Software and Documentations Specialist
Read More

Mark Camp

Technology and Program Project Manager
Read More

Everett Chatham, P.E.

Pressure Vessel Group Lead
Read More

Mark Carte

NDE Subject Matter Expert - Consultant and Trainer
Read More

Zumao Chen, PhD

Computational Fluid Dynamics (CFD)
Read More

Ranjan Chithranjan, PhD, PE

Coke Drums, Tanks and FFS
Read More

Aleksandr Chernoff

Mechanical Subject Matter Expert
Read More

Harold Clem

Read More

Michael Cooch, PE

CCD Project Manager
Read More

Danny Davis

Site Manager
Read More

R. Peter Deubler, PE

Read More

Olavo Dias

Integrity and Corrosion Expert
Read More

Phong Diep

Pressure Vessel, Standards and Specification Development
Read More

Tom Doolin

Account Manager and Process Division
Read More

Robert F. Dubil, PE

Senior Engineering: Fired Heaters
Read More

Frank Engli

Maintenance & Turnaround Specialist
Read More

Jeff Everett

Subject Matter Expert - Project Management
Read More

Santiago Traverso

Turnaround Consultant
Read More

Walter F. Farmayan

Combustion Specialist
Read More

Allen Feltzin

Read More

Del J. Forbes, PhD

Read More

Donald R. Frikken, PE

Read More

Joseph T. Geiger

Read More

Jeff Goldstein

Mechanical Integrity Group Lead
Read More

Magnus Gustafsson, PE

FFS and Pressure Vessels
Read More

Andy Gysbers, PEng

Refining Metallurgical and Corrosion Engineering Expert
Read More

Jon Heredia, M.Sc.

Read More

Greg Hollinger, PE

Read More

Arve Holt, PE

Read More

Jerry Horak, PE

Read More

Daniel C. Hunt

Read More

Lindell “Bob” Hurst, Jr

Engineer - Chemicals and Refining Materials/Corrosion
Read More

A. S. Jamaluddin, PhD

Combustion and Heat Transfer Process Expert
Read More

Maureen Brody

Training Lead – Private Training & Curriculum Development, Becht Learning & Development Division
Read More

Scott Jernigan

Read More

R. James Johnson

Engineer - Metallurgy and Materials
Read More

Annette Karstensen

Integrity and Corrosion Expert
Read More

Tracie Keeth

Project Coordinator
Read More

Gersh Kogan

High Temperature Piping SME
Read More

Kyle Kourelakos

Read More

Don Kurle, PE

Pressure Vessels and Heat Exchangers
Read More

Richard Lackey

Read More

Himanshu Joshi

Heat Exchanger Specialist
Read More

Karen Li

CCD Project Manager and Refining Corrosion Engineer
Read More

Frank Liu

Chief IR Technologist
Read More

Carlos Lopez

Read More

Lauren Lopez

Senior Financial Analyst
Read More

Vernon L. Maddox, Jr., PE

Read More

Philip R. Magaletta

Read More

Richard Manner

Read More

Peter Marsh

Read More

Todd Marut

Read More

Frank Masiello, PE

Read More

Cassandra Manzato

CCD/IOW Project Analyst
Read More

Keith McKinney

Refining / Petrochemical / LNG Corrosion and Asset Integrity Expert
Read More

Jim McLaughlin

Refining Metallurgical and Corrosion Engineering Expert
Read More

Hearl Mead, Jr

Refining Metallurgical & Corrosion Engineer & Asset Integrity Management Expert
Read More

Gorka Millán, M.Sc.

Read More

David Moore, PE

Refining Metallurgical and Corrosion Engineering Expert
Read More

Ellah D. Morvay, MSMfgE

Technical Training Lead
Read More

Elena Niemi

Software Developer
Read More

Ralph C. Norton

Refinery Process Operations
Read More

Nohemi Ortiz

Coordinator - Corporate Safety
Read More

Glenn Osterwisch

Read More

Derrick Pease

Read More

Glen Phillips

Read More

Winston K. (Win) Robbins, PhD.

Analytical Chemistry Expert
Read More

Lisa Roberts

Refining Materials and Corrosion and RBI Expert
Read More

Sim Romero

Subject Matter Expert - Coking and Heavy Oil
Read More

Eugene ‘Gene’ Roundtree

Strategic Business Planning
Read More

Scott M. Sayles

Manager Renewable Fuels and Alternate Feeds
Read More

Frank Sapienza

Refining Corrosion and Metallurgy Specialist and CCD Project Manager
Read More

Vivian Schaad

Coordinator - Advisor Onboarding
Read More

William ‘Bill’ Schrof

Read More

Clinton Schulz

Refining Metallurgical/Corrosion Expert
Read More

Bruce Scott

Reliability
Read More

Lyman “Tony” Scribner

Read More

J. Robert “Bob” Sims

Senior Engineering Fellow and ASME Past President
Read More

Paul Southerland

Project Manager - Fixed Equipment, Mechanical Integrity, and Reliability Engineering
Read More

Mark Stonehouse, PEng

Read More

Kenneth Stoops, PE

Read More

Sridhar Srinivasan

Modeling/Software Leader; Corrosion Expert
Read More

Jeremy Lundquist, EIT

Read More

Robert Sturgis

Project Engineering Manager
Read More

LaKeshia Taylor

Reliability Engineering
Read More

Amin Terouhid, Ph.D., PE

Project Management Subject Matter Expert
Read More

Nataly Thompson

Project Coordinator
Read More

R. Stephen “Steve” Tiek

Senior Turnaround Services
Read More

Kenny Carroll

Risk-Based Inspection Analyst
Read More

Charles Maier

Turnaround & Maintenance SME
Read More

David H. Vahlsing, PE

Division Manager - Philadelphia, PA
Read More

Torney Van Acker

Read More

John S. Wang, Ph.D

Acoustics and Noise
Read More

Clay White

Refining and Petrochemical FEMI and Metallurgical/Corrosion Expert
Read More

Abbey Wing

Group Head - CCD and RBI Project Manager
Read More

Paul Wittenbach

Welding and Metallurgical Engineer
Read More

Jon Yutzy

Senior Software Engineer
Read More

Chris Zielewski

Read More
Let Becht Turn Your Problem
Into Peace of Mind